23 Watt Compact Fluorescent Spiral Light Bulb / GU24 Base CFL / 2700K Color Temperature Review

A difficult bulb to find in the Brick and Mortar world, but not on Amazon! I have 2 outdoor fixtures that I needed a GU-24 base bulb for and this fit perfectly.

Click Here to see more reviews about: 23 Watt Compact Fluorescent Spiral Light Bulb / GU24 Base CFL / 2700K Color Temperature

Product Description:
Energy Saving Compact Fluorescent Mini Spiral Light Bulb; 23 Watts; 120 Volts

Buy cheap 23 Watt Compact Fluorescent Spiral Light Bulb / GU24 Base CFL / 2700K Color Temperature now

COLORwwy503l Review

This is replacement light for one that broke on our existing family room fan.The light is polished brass to match the existing fam which is very dificult to find these days for those consumers using Hunter fans.Our Hunter fan is now, 20 years, young and works great...we were very pleased to find this company that sold us this nice and well illuminated fan light...we highly recommend...it has now been used 2 years with no problems.

Click Here to see more reviews about: COLORwwy503l

Product Description:
Featured here is a polished brass finish five light down arm light kit with frosted glass. This light kit has four down curved arms with frosted bell shaped glass shades and a decorative center frosted crystal bowl that connects to the housing and a center pull chain. This light kit uses five 60 watt candelabra base bulbs (not included) and will add soft light and a decorative touch to any light kit adaptable ceiling fan.

Buy cheap COLORwwy503l now

Hole Pro X-425 Kit: 1-7/8" to 17" and all fractional sizes in between. Infinitely Adjustable Cutter with Twin Tungsten Carbide Blades cut fast using ¼ drill power of hole saws to cut Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie-board Review

As a skylight installer, the faster I can get the job done the more money I make.This adjustable hole cutter from Hole Pro saves me time on the job. With the dust shield and its soft rubber edge I get a good seal so shavings don't go all over the place and I don't have to worry about the cut piece falling on something and causing damage. So I don't have to move as much furniture or use drop cloths over everything and I don't need to trace a template circle for the cutout.

The shield also can be used to adjust the depth of the cut so I don't accidentally cut something up in the ceiling including a beam. With the two blades it cuts fast even at lower rpms, and it makes a real clean hole even in plaster ceilings.

It is a very well made tool and the plastic dust shield is light but tough and will hold up on the job. The blades are quick to change if I want to use the high speed steel blades instead of the tungsten carbide ones. Both kinds are included in the case with the hole cutter. I do need to make sure that the three prongs of the drill chuck line up with the 3/8 inch shaft of the hole cutter which has three flattened sides for better grip. The keyless chucks also seem to work better than the ones that need a key and tightening each side of the drill chuck.

I now install 10 inch and 14 inch tubular skylights but if I start to install a different size skylight the hole cutter is quick to adjust to any size tubular skylight being made today up to the 16 inch sizes. I still use a sawzall on the roof but there the debris falls into the attic. Inside the customer's home where I am making the ceiling hole this tool saves me time and customers appreciate that there is less disruption and dust and I am in and out of the job site faster.

Click Here to see more reviews about: Hole Pro X-425 Kit: 1-7/8" to 17" and all fractional sizes in between. Infinitely Adjustable Cutter with Twin Tungsten Carbide Blades cut fast using ¼ drill power of hole saws to cut Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie-board

Product Description:
One kit takes the place of dozens of hole saws while enabling fast dust free cutting exact size holes from 1-7/8" up to 17" inches in diameter. Kit includes high quality adjustable hole cutter, ball bearing mounted ABS shield with soft rubber gasket to trap dust and shavings, user replaceable sets of both High Speed Steel and Tungsten Carbide blades, hex wrenches, and sturdy carry case. Shield keeps cutter perpendicular to work surface and cutter has adjustment knob to limit the depth of cut when making holes in walls or ceilings to avoid accidentally cutting wires or pipes. All parts precision machined, measure bar is chrome plated and marked in both inches and millimeters. ABS composite plastic shield is made from the same material as used in hocky helmets and is lightweight, strong, and will not discolor with age. Perfect for installing recessed lights, tubular skylights, in-ceiling speakers, ceiling fans, duct vents, or providing access holes for repairs.Kit includes user replaceable High Speed Steel blades for cutting wood, MDF, Lexan and other plastics, acoustic tile, tongue and groove, laminates, and Tungsten Carbide blades for cutting sheetrock, plaster, cement or Hardi board, fiberglass, OSB, chipboard, plywood, and similar materials. Twin blades for faster cutting and perfect balance eliminate the need for balance bars which can break off inside other cutters.Requires ¼ the torque of common hole saws so a smaller drill can be used and cordless drills can cut more holes before needed to be recharged. ½" cord drills that are rated for maximum hole saw size of 3-1/2 inches for wood can cut holes up to 12" in diameter in plywood using the Hole Pro hole cutter.Like all Hole Pro Power Series kits the shield can be used with the Hole Pro XL-Arbor kit to enable the use of specialty hole cutters such as tungsten grit cutters when cutting tile or stone and have the same dust control and depth control as provided with the adjustable hole cutters.

Buy cheap Hole Pro X-425 Kit: 1-7/8" to 17" and all fractional sizes in between. Infinitely Adjustable Cutter with Twin Tungsten Carbide Blades cut fast using ¼ drill power of hole saws to cut Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie-board now

Hunter - 22333 : UL® Outdoor Listed Globe - New Bronze Review

Product arrived fine. Packaged well (as most Hunters products are).
Sent quickly from supplier (Thanks, Del Mar Designs)
Only complaint is that information was very limited on Amazon website.
Forunately my fiance had looked around before going on Amazon and had found the same fan light elsewhere.
For anyone interested - the picture is not a good representation of the colour (it's kinda frosted cream I guess, doesn't picture well)
And it doesn't come with lights included - you will need two candelabra base bulbs.
Still a good Hunter product - I suppose information for it might be found on their website.

Click Here to see more reviews about: Hunter - 22333 : UL® Outdoor Listed Globe - New Bronze

Product Description:
Hunter - 22333 : UL® Outdoor Listed Globe - New Bronze

Buy cheap Hunter - 22333 : UL® Outdoor Listed Globe - New Bronze now

TINKERBELL TINKER BELL 2-PLUG OUTLET WALL PLATE Review

this is a simple plate with stickers on it the over priced and not profecinal . my package showed up opened . i stated my son could do better job creating one for less than $1.50 and thats bad for the seller . i think this seller had a nasty run with customers . i think seller should be removed from amazon .

Click Here to see more reviews about: TINKERBELL TINKER BELL 2-PLUG OUTLET WALL PLATE



Buy cheap TINKERBELL TINKER BELL 2-PLUG OUTLET WALL PLATE now

Avion 5 Light Chandelier Review

BEAUTIFUL CHANDELIER OVER MY DINING ROOM TABLE.PRICE WAS GREAT AND THE CHANDELIER ARRIVED A-OK.VERY PLEASED.!!

Click Here to see more reviews about: Avion 5 Light Chandelier

Product Description:
Perfect for entrance or dining areas

Buy cheap Avion 5 Light Chandelier now

Jolie, Floor Glass-Porcelain Lamps 28551 By Uttermost Review

I installed this light kit myself on the hunter ceiling fan.
It installed easily and looks great.
My only regret is it uses candelabra base light bulbs.
I wish it used standard bulbs.

Click Here to see more reviews about: Jolie, Floor Glass-Porcelain Lamps 28551 By Uttermost

Product Description:
This floor lamp is finished in a dark bronze plated metal with crystal details. The round bell shade is a silkened, chocolate-bronze, woven textile with black slubbing.

Buy cheap Jolie, Floor Glass-Porcelain Lamps 28551 By Uttermost now

Hole Pro X-148 Kit: 1-7/8" to 5-7/8" and all fractional sizes in between. Infinitely Adjustable Cutter with Twin Tungsten Carbide Blades cut fast using ¼ drill power of hole saw - Cut Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie Board Review

I bought this tool to cut duct outlets for high velocity AC systems I install from Unico. I have used the X-305 model for Airtec MV diffusers and this smaller size uses the same blades and has the same great build quality.

It is easy to adjust the size hole and I can use a cordless drill to cut holes where if I used a hole saw I would need to use a cord drill and an extension cord and worry about clean cuts and have all the dust and shavings to cleanup afterwards. I used it with the high speed steel blades to cut 20 holes in a 5/8" tongue and groove wood ceiling for 5 inch light cans in less than an hour. And I used an old 18 volt Milwaukee cordless drill that uses NiCad battery packs.

I even cut speaker holes in my boat using the tungsten carbide blades to cut holes through the gelcoat and fiberglass. For a tight fit I needed to make a 5-1/8" cutout for the waterproof speakers. Try to find a hole saw that is 5-1/8" - it does not exist.

The 7 inch diameter shield makes it easy to get the tool in tight spaces or close to the edge of a soffit or cabinet and also keeps the cutter perpendicular. I like that I can adjust how deep it cuts so I don't need to worry about cutting something hidden behind the wall or clipping a beam.

The storage case is very high quality, and much better than the cases with the tools I have bought. I like having everything I need in a single case, including spare blades.

I like to buy a tool that will last for many years of use and the Hole Pro hole cutters are that kind of tool. Everything about them is first class.

Click Here to see more reviews about: Hole Pro X-148 Kit: 1-7/8" to 5-7/8" and all fractional sizes in between. Infinitely Adjustable Cutter with Twin Tungsten Carbide Blades cut fast using ¼ drill power of hole saw - Cut Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie Board

Product Description:
One kit takes the place of dozens of hole saws while enabling fast dust free cutting exact size holes from 1-7/8" up to 5 7/8" inches in diameter. Kit includes high quality adjustable hole cutter, ball bearing mounted ABS shield with soft rubber gasket to trap dust and shavings, user replaceable sets of both High Speed Steel and Tungsten Carbide blades, hex wrenches, and sturdy carry case. Shield keeps cutter perpendicular to work surface and cutter has adjustment knob to limit the depth of cut when making holes in walls or ceilings to avoid accidentally cutting wires or pipes. All parts precision machined, measure bar is chrome plated and marked in both inches and millimeters. ABS composite plastic shield is made from the same material as used in hocky helmets and is lightweight, strong, and will not discolor with age. Perfect for installing recessed lights, tubular skylights, in-ceiling speakers, ceiling fans, duct vents, or providing access holes for repairs.Kit includes user replaceable High Speed Steel blades for cutting wood, MDF, Lexan and other plastics, acoustic tile, tongue and groove, laminates, and Tungsten Carbide blades for cutting sheetrock, plaster, cement or Hardi board, fiberglass, OSB, chipboard, plywood, and similar materials. Twin blades for faster cutting and perfect balance eliminate the need for balance bars which can break off inside other cutters.Requires ¼ the torque of common hole saws so a smaller drill can be used and cordless drills can cut more holes before needed to be recharged. ½" cord drills that are rated for maximum hole saw size of 3-1/2 inches for wood can cut holes up to 12" in diameter in plywood using the Hole Pro hole cutter.Like all Hole Pro Power Series kits the shield can be used with the Hole Pro XL-Arbor kit to enable the use of specialty hole cutters such as tungsten grit cutters when cutting tile or stone and have the same dust control and depth control as provided with the adjustable hole cutters.

Buy cheap Hole Pro X-148 Kit: 1-7/8" to 5-7/8" and all fractional sizes in between. Infinitely Adjustable Cutter with Twin Tungsten Carbide Blades cut fast using ¼ drill power of hole saw - Cut Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie Board now

Virginia Candle Woodwick Diffuser Refill (Vanilla Bean) Review

This refill set is great.It is a huge cost-saver if you already have the wood wick original set.

Click Here to see more reviews about: Virginia Candle Woodwick Diffuser Refill (Vanilla Bean)

Product Description:
The easy convenient way to refill your Virginia Candle diffuser for less!This set includes 1-7.4oz Bottle of Reed Diffuser Oil and 12 Reeds.Refresh any reed diffuser or create your own!Designed to last 3 months or more!

Buy cheap Virginia Candle Woodwick Diffuser Refill (Vanilla Bean) now

Emerson Midway II CF929BS in Brushed Steel Review

This is an expensive fan -- at the high end of the range for ceiling fans of this type.But I liked the look and the fact that it uses an energy efficient fluorescent bulb.The fan ships direct from the factory, and the first fan I received was the wrong fan packed in the wrong box.Poor quality control at the Emerson factory.Still, these things happen, so I returned it and got a replacement about a week later.

The new unit was the right model, but still had several problems.A deformed housing is probably the biggest problem, causing the blades to be out of alignment, and causing a severe wobble -- especially at the higher speeds.

Problem 2 was that the "maple" blades advertised are actually ugly plastic blades with a fake wood pattern printed on them.Very cheap and disappointing.

The bulb is advertised as dimmable, but this isn't the case.It's pretty much on or off.There is the slightest change in brightness when holding the dimmer button, but it is almost impossible to even notice.Turning the light on and off sometimes requires a "double click" on the remote, other times, just one click.Confusing and hard to use.

Lastly, the remote is extremely problematic.The 20 foot advertised range is greatly overstated, as the remote only works from 3 - 5 feet away (you have to be directly under the fan for it to work).And even when standing right at the fan, the remote only works some of the time (and with a very noticable delay).

For the price (or at any price), this is an extremely low quality fan, with poor quality control from the factory.Best to avoid.

Click Here to see more reviews about: Emerson Midway II CF929BS in Brushed Steel

Product Description:
Emerson Midway II CF929BS in Brushed SteelMotor Finish: Brushed SteelBlade Choice: Custom Blades IncludedBlades Included: Maple BladesEnergy Star ApprovedDecorative Coupler Cover IncludedBlade Span: 52 inBlade Pitch: 26°Number of Blades: 5Motor Size: 188 x 18 mmRPM Range (Lo-Hi): 65-175Lifetime Motor WarrantyDownrod Included: 4.5 inFan Control Included: Remote ControlLight Kit: IncludedLamping: (1) 40-Watt Fluorescent Bulbs (Included)Items Sold Separately: Optional AccessoriesFor optional downrods, in all available finishes, please visit the Emerson Downrods category.For adaptable or optional light kits, please visit the Emerson Lighting Accessories category.

Buy cheap Emerson Midway II CF929BS in Brushed Steel now

Minka-Aire DR524BNW 24" Downrod Brushed Nickel Wet 3/4" ID Review

on a 700 tube it has enough volume to get your pressure up while you are on the road. fits anywhere and looks nice.wish it would let go of the valve stem easier after pumping up but then again holds on during pumping to my 120 psi.

Click Here to see more reviews about: Minka-Aire DR524BNW 24" Downrod Brushed Nickel Wet 3/4" ID

Product Description:
24 inch downrod extension pole in Brushed Nickel Wet for Minka Aire ceiling fans

Buy cheap Minka-Aire DR524BNW 24" Downrod Brushed Nickel Wet 3/4" ID now Get 34% OFF

Hole Pro X-230 Kit: 1-7/8" to 9" and all fractional sizes in between. Infinitely Adjustable Cutter with Twin Tungsten Carbide Blades needs ¼ drill power of a hole saw to quickly cut Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie Board Review

The Hole Pro X-230 is a well built tool that makes the task of cutting holes much simpler. If you are required to cut holes into drywall, you cannot live without this tool. It is also capable of cutting woods, plastics, and other materials.

This worked great with my puny 14.4v Dewalt drill. The plastic shield does an *excellent* job of containing dust, debris, and flying chunks. Anyone doing renovation work or a job where cleanup is a big issue, this is a must have tool. I cannot ever imagine going back to cutting holes with a drywall saw.

All of the parts are heavy duty and well built. The shield doesn't leave marks, the blades are strong, and the spinning motion is perfectly balanced. Do not waste your money with the cheaper imitations (~$50).

Because the saw blades are adjustable, this can literally replace a dozen hole saws of various sizes. The only reason to keep hole saws is for specialty applications such as cutting metal or tight locations. While the shield is removable, the "bar" that the blades attach to is a fixed length.

Click Here to see more reviews about: Hole Pro X-230 Kit: 1-7/8" to 9" and all fractional sizes in between. Infinitely Adjustable Cutter with Twin Tungsten Carbide Blades needs ¼ drill power of a hole saw to quickly cut Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie Board

Product Description:
One kit takes the place of dozens of hole saws while enabling fast dust free cutting exact size holes from 1-7/8" up to 9" inches in diameter. Kit includes high quality adjustable hole cutter, ball bearing mounted ABS shield with soft rubber gasket to trap dust and shavings, user replaceable sets of both High Speed Steel and Tungsten Carbide blades, hex wrenches, and sturdy carry case. Shield keeps cutter perpendicular to work surface and cutter has adjustment knob to limit the depth of cut when making holes in walls or ceilings to avoid accidentally cutting wires or pipes. All parts precision machined, measure bar is chrome plated and marked in both inches and millimeters. ABS composite plastic shield is made from the same material as used in hockey helmets and is lightweight, strong, and will not discolor with age. Perfect for installing recessed lights, tubular skylights, in-ceiling speakers, ceiling fans, duct vents, or providing access holes for repairs.Kit includes user replaceable High Speed Steel blades for cutting wood, MDF, Lexan and other plastics, acoustic tile, tongue and groove, laminates, and Tungsten Carbide blades for cutting sheetrock, plaster, cement or Hardi board, fiberglass, OSB, chipboard, plywood, and similar materials. Twin blades for faster cutting and perfect balance eliminate the need for balance bars which can break off inside other cutters.Requires ¼ the torque of common hole saws so a smaller drill can be used and cordless drills can cut more holes before needed to be recharged. ½" cord drills that are rated for maximum hole saw size of 3-1/2 inches for wood can cut holes up to 12" in diameter in plywood using the Hole Pro hole cutter.Like all Hole Pro Power Series kits the shield can be used with the Hole Pro XL-Arbor kit to enable the use of specialty hole cutters such as tungsten grit cutters when cutting tile or stone and have the same dust control and depth control as provided with the adjustable hole cutters.

Buy cheap Hole Pro X-230 Kit: 1-7/8" to 9" and all fractional sizes in between. Infinitely Adjustable Cutter with Twin Tungsten Carbide Blades needs ¼ drill power of a hole saw to quickly cut Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie Board now

Westinghouse Lighting 77076 Cathedral Canopy KIT 3/4" - Polished Brass Review

The kit came complete with all I needed to re-install my ceiling fan after the original bracket broke.Be sure you know the diameter of the fan extension pole to make sure it will fit.I was unable to locate the brass version of the kit locally so I searched the internet and found exactly what I needed.

Click Here to see more reviews about: Westinghouse Lighting 77076 Cathedral Canopy KIT 3/4" - Polished Brass

Product Description:
3/4", Polished Brass Finish, Cathedral Ceiling Fan Canopy Kit, Includes 3/4" I.D. Ball, Mounts Onto A Cathedral Ceiling Having Up To A 45°ree. Angle, Carded.

Buy cheap Westinghouse Lighting 77076 Cathedral Canopy KIT 3/4" - Polished Brass now

American/Federal Pacific Circuit Breaker, 2-Pole 30-Amp Thick Series Review

The breaker is a (Trade Name) Federal Pacific Thick Stabloc and as such can only be used in thick Stablock panels.The description should not say what it can be used to operate and the wattage rating is wrong.I am a member of the NFPA and a licensed Electrical Contractor.240 volt rating of this breaker at 30 amps is 7200 Watts not 8800 Watts.

Click Here to see more reviews about: American/Federal Pacific Circuit Breaker, 2-Pole 30-Amp Thick Series

Product Description:
Double pole common trip 120/240 V AC 30 amps Stab-lock Thick Style 2"

Buy cheap American/Federal Pacific Circuit Breaker, 2-Pole 30-Amp Thick Series now

Westinghouse 64086 Symphony Hall Three-Light Pendant, Distressed Black, with Speckled Bronze Globes Review

This item is not as advertised.The title description is brushed nickle with white alabaster...the product you get is black metal with bronze alabaster!!(The product number is the same...)Someone wasn't very careful in the description.Just want to alert you.(A pain...now I have to return it.)

Click Here to see more reviews about: Westinghouse 64086 Symphony Hall Three-Light Pendant, Distressed Black, with Speckled Bronze Globes

Product Description:
The Westinghouse "Symphony Hall" 3-light pendant is elegantly designed with a distressed black finish and a speckled bronze glass shade. The bronze glass shade helps to give the light a warm Earthy hue making this pendant perfect for use over a small dining table or in an entryway or foyer with classic or modern decor. In addition to the beautiful design, the unit has both your pocketbook and the Earth in mind with the inclusion of three energy-saving, bright white compact fluorescent bulbs. These innovative twist lock style Energy Star rated bulbs boast a lifetime over 10,000 hours and use only a paltry 39 watts to produce a total light output that is the equivalent of 180 watts of energy-sucking incandescent light bulbs. This reduction in energy usage amounts to a savings of almost 80%. The light fixture measures 26-1/4 inches high and 16 inches in diameter. The shade is 5-7/8 inches high and 16 inches in diameter. The fixture hangs on a 108-inch distressed black finish chain. UL/CUL listed for safety.
--Bree Norlander
What's in the Box
3-light pendant with chain, speckled bronze glass shade, and three GU24 base compact fluorescent 13-watt bulbs


Buy cheap Westinghouse 64086 Symphony Hall Three-Light Pendant, Distressed Black, with Speckled Bronze Globes now Get 35% OFF

Atlas Homewares 277-P 6-Inch The Classics Collection Large Hammered Pull, Pewter Review

When I got these in today, I wasn't expecting much but when I opened the box, I was shocked to see just how ornate and beautiful they really are.
I have solid cream cabinetry and didn't want something too dark or too shinny.This fit the bill perfectly.
If you are hesitant to purchase these, just buy one and see if you like it.It's worth making sure.Hardware is soooo expensive and really adds up fast!

Click Here to see more reviews about: Atlas Homewares 277-P 6 Inch The Classics Collection Large Hammered Pull, Pewter

Product Description:
Atlas Hammered Pull 6l 1.25 Projection 5 Center To Center Spread Pewter All items sold new in original packaging

Buy cheap Atlas Homewares 277-P 6 Inch The Classics Collection Large Hammered Pull, Pewter now Get 10% OFF

Nutone 9965 70 CFM 100 Watt Incandescent Light Deluxe Heat-A-Ventlite Review

I have had two of these fans in some of my bathrooms.Both were LOUD and short lived.My parents had a similar fan as well and were quite dissapointed with them.Neither of my units lasted more than two years without having to replace the motors (I've even cracked the motors open myself and relubed them).Even the warranty battle has been dissapointing... Without writing a book, I have had some other general problems with these units related to electronics and plastic bezel.I have replaced the unit with a less expensive, heavier constructed, and quieter unit made by Hunter.Music to my ears and much more reliable.

Click Here to see more reviews about: Nutone 9965 70 CFM 100 Watt Incandescent Light Deluxe Heat-A-Ventlite

Product Description:
Broan-NuTone 9965 70 CFM, 4.0 Sones, Combination fan with 1500W heater, 100W incandescent light and 7W night-light. Includes four-function switch. 4" duct connector.Deluxe Heaters Combination Units Choose the combination unit to meet your needs. Now you have a lighting choice of energy-saving fluorescent or incandescent ceiling light.Broan-NuTone 9965 70 CFM, 4.0 Sones, Combination fan with 1500W heater, 100W incandescent light and 7W night-light. Includes four-function switch. 4" duct connector. Features:; Soothing heat (fan-forced) ; Powerful ventilation ; Bright ceiling light ; Convenient night-light; Heat-A-Ventlite?«

Buy cheap Nutone 9965 70 CFM 100 Watt Incandescent Light Deluxe Heat-A-Ventlite now Get 17% OFF

Smarthome Insteon Switchlinc V2 Relay Review

I've installed nearly 60 Insteon devices into our home, including many of these On/Off switches, similar dimmer switches, motion detectors, garage door sensors than can open / close the door, keypads, and thermostats for controlling the heating and air conditioning.

The house went from dumb to smart for a fraction of the cost of the high end systems because these Insteon devices communicate with each other (and your Mac or PC) via existing electrical wiring in most homes.They wire a little differently than typical switches in that where most switches are just connected to a ground, load, and line; these are connected to the ground, load, line, and neutral wires in the box.(Get an electrician to install them for you, it won't add much to the cost and will be the safest way to avoid inherent electrical dangers).

Our porch and exterior lights now turn on at sunset and off at sunrise (or earlier if we want) because our computer knows what time to send the on/off signal each day.When the kids leave the basement playroom, all 8 ceiling lights turn off after no motion is sensed for a few minutes.Same thing in the kitchen, and I'll be adding motion sensors to the stairway lights so that a nice, low light will automatically come on when we check on the kids in the middle of the night to avoid stumbles and falls (in the evening, the same motion sensor could turn it on but with full power).

My wife really likes the smart switches, which can be customized with engravings like "Exhaust Fan On" or "Movie Scene."Movie scene allows us to press one button that turns on four sets of lights around our family room, turns on the TV, sets the stereo and other components to their proper settings, then slowly dims to darkness as we settle into the couch.

You could even program this switch (or a keypad) to control heating or cooling.For example, instal one of these so that pressing up or down will raise or lower the temperature setting in that zone of your house one degree per press.It could be a permanent adjustment or could revert back to the "normal" or "energy efficient" settings after some period of time or until a motion sensor detects that you've left that room.

We love this system.

BTW, we run it using Indigo software on a Mac, which is great.PC software can integrate with it, too.

Click Here to see more reviews about: Smarthome Insteon Switchlinc V2 Relay

Product Description:
SMARTHOME INSTEON SWITCHLINC V2 RELAY

Buy cheap Smarthome Insteon Switchlinc V2 Relay now Get 2% OFF

The AirFlow Breeze Home Heating/Cooling System (Brown) (Fits 4"W x 10"L opening) Review

I ordered this product for our upstairs bedroom vent to help cool the room. The thermostat to control the fan speed is a great idea, but ours doesn't consistently run only when the AC kicks on. When it does run, it's not exactly quiet and kind of annoying. However, we do manage to sleep through it fine. Overall though, I gave this product only 2 stars because it doesn't force that much more cold air into the room. It would also be helpful if the vent slats were directional. Running the fan function by itself (not with the AC) produces no extra cold air, only air movement.
After purchasing one, I hoped it would work at least okay to purchase another for my upstairs office. Instead, I'm shelling out the money for a free standing AC unit. I'd advise you to do the same if you want cold air.

Click Here to see more reviews about: The AirFlow Breeze Home Heating/Cooling System (Brown) (Fits 4"W x 10"L opening)

Product Description:
Give Your Heating and Cooling System a Boost!The Amazing AirFlow Breeze works with your existing central heating and cooling system, drawing additional air to the problem areas in your home.Once you set your target comfort level, the built-in temperature sensor takes over!It will direct the powerful, yet quiet fan to pull extra warm or cool air out of weak registers, increasing air flow, and delivering the comfort you demand.By improving the air flow from your existing central heating and cooling system, the AirFlow Breeze provides an affordable alternative to window air conditioners, space heaters, costly attic fans and complex zoning systems.That's right!Increase your comfort, and save money too!To get technical for a moment, your furnace and air conditioner bring comfort to your home by moving air through ducts to each room in your house. When the fan from the main system cycles off there is still conditioned air lingering in ducts and crawl spaces. The AirFlow Breeze pulls this conditioned air to your rooms, keeping them more comfortable longer, so your furnace or air conditioner will run less often, lowering your utility bills! It's easy to install, with no tools necessary, fitting into most standard vent openings.Best of all, it's safe for children and pets due to low voltage operation.And don't worry, the stylish AirFlow Breeze blends into any room decor. Available in Almond or Brown.Fits into most standard 4 x 10 vent openings. Assembly"

Buy cheap The AirFlow Breeze Home Heating/Cooling System (Brown) (Fits 4"W x 10"L opening) now Get 17% OFF

30 in. 2 speed Belt Drive Whole House Fan Review

I grew up with house fans, and this one worked just the way I remember it. Open a few windows, turn the fan on and... a lot of air gets sucked in the open windows. It's great on cool evenings after a hot day. Small children passing too close to the windows are liable to get sucked through when this thing is on. It's not too noisy either. It does make noise, but the belt drive system seems to help make it run quieter. I wouldn't instal it in the middle of the living room, but it's not loud enough to disturb you if you put it in a hallway. I will say that the shutters are a little cheap. But they work the way they are supposed to. They close when the fan is off, to what looks like a mostly air tight seal.

Click Here to see more reviews about: 30 in. 2 speed Belt Drive Whole House Fan

Product Description:
Whole House Fan, Belt Drive, 2 Speed, Propeller Dia 30 In, CFM High 5700, CFM Low 4275, HP 1/3, Fan RPM 525/400, Voltage 120, 60 Hz, Single Phase, Amps 6.9/4.0, Height 20 In, Width 34 In, Depth 34 In, Ceiling Mounting Location, Includes 2-speed Wall Switch and White Shutter

Buy cheap 30 in. 2 speed Belt Drive Whole House Fan now

Atlas Homewares A829-BN 8-1/4-Inch Euro-Tech Collection Round Rail Pull, Brushed Nickel Review

I was very happy with these pulls - they are very heavy, high quality metal, and very well-made.The finish is excellent.

Highly recommended!

Click Here to see more reviews about: Atlas Homewares A829-BN 8-1/4 Inch Euro-Tech Collection Round Rail Pull, Brushed Nickel

Product Description:
Atlas Round Rail Pull 8.25l .375w 1.25 Projection 192mm Center To Center Spread Brushed Nickel All items sold new in original packaging

Buy cheap Atlas Homewares A829-BN 8-1/4 Inch Euro-Tech Collection Round Rail Pull, Brushed Nickel now Get 17% OFF

American/Federal Pacific Circuit Breaker, 1-Pole 15-Amp Thin Series Review

Ordered this and the 20amp circuit and they were obviously used. Amazon sent replacements and both again were used. Amazon, why are you selling (of all things) used circuit breakers? Are you trying to burn someones house down?

Click Here to see more reviews about: American/Federal Pacific Circuit Breaker, 1-Pole 15-Amp Thin Series

Product Description:
Double pole common trip 120/240 V AC 15 amps Stab-lock Thick Style 2"

Buy cheap American/Federal Pacific Circuit Breaker, 1-Pole 15-Amp Thin Series now

Atlas Homewares 259-R 6-Inch Craftsman Corner California Craftsman Pull, Rust Review

Very nice product-product was actually better than the pictures!
Only less than good comment was the price per unit-but it was my choice to purchase at that price.
I would purchase from them again

Click Here to see more reviews about: Atlas Homewares 259-R 6 Inch Craftsman Corner California Craftsman Pull, Rust

Product Description:
Atlas Craftsman Pull 6 This Item Is Available To All Stores, But Is Only Stocked In Rsc S.The Product Will Be Shipped To Your Store In 3-5 Days Via Ups If You Dont Pull From Sacramento. Bagged Rust All items sold new in original packaging

Buy cheap Atlas Homewares 259-R 6 Inch Craftsman Corner California Craftsman Pull, Rust now Get 10% OFF

Atlas Homewares 30031-I 3-1/2-Inch Twisted Wire Pull, Iron Review

look at the title3 1/2 inch.. its 3 inch.. bad seller bad... go in time out

Click Here to see more reviews about: Atlas Homewares 30031-I 3-1/2 Inch Twisted Wire Pull, Iron

Product Description:
Atlas Twisted Wire Pull 3.5 This Item Is Available To All Stores, But Is Only Stocked In Rsc S.The Product Will Be Shipped To Your Store In 3-5 Days Via Ups If You Dont Pull From Sacramento. Iron Bagged Discovery Acc All items sold new in original packaging

Buy cheap Atlas Homewares 30031-I 3-1/2 Inch Twisted Wire Pull, Iron now Get 10% OFF

Kenroy Home 20983ORB Villager Floor Lamp, Oil Rubbed Bronze Review

Looks great online, but only talks about foot switch.I want a lamp to put behind a couch...

Click Here to see more reviews about: Kenroy Home 20983ORB Villager Floor Lamp, Oil Rubbed Bronze

Product Description:
20983ORB Features: -Floor lamp. -Oil rubbed bronze finish. -Painted metal construction. -Oil rubbed bronze finish metal shade. -Features a lock position arm. -Adjustable arm and head. -Reading lamp. -Stylish task lighting. -Features sharp minimal design, wide head, and footed pyramid base. -Gives this contemporary piece an artful presence. -On/Off foot switch. Specifications: -Assembly required. -Accommodates (1) 100W medium base bulb. -Shade dimension: 12" Width. -Overall dimensions: 60" H x 12" W x 12" D.

Buy cheap Kenroy Home 20983ORB Villager Floor Lamp, Oil Rubbed Bronze now

COLORfph70ac Review

We broke the bank an bought this fan to top off the remodel of our outdoor porch. It is an absolute show-stopper. The materials and craftsmanship are terrific, as you would expect at this price. And even at its highest speeds it is amazingly quiet.

All that said, it has one great drawback: it does little to actually move the air.

At this price we were expecting the Big Three to want to borrow it to power their wind tunnel tests. But from distances exceeding two feet, it's feels like a hand blow-dryer on low. I actually called the company to see if I was doing something wrong. They shrugged their shoulders (over the phone) as if they've heard this complaint quite a bit. On really hot days we pull out our $17 oscilating fan from Wal-Mart. It performs much better.

So this fan is truly the case study for form over function. If you need a great prop for a movie set this is the fan for you.If you actually intend to use the fan as a cooling device, you may be disappointed.

Click Here to see more reviews about: COLORfph70ac

Product Description:
Beautifully sculptured, this unique floor mount fan in rust with carved post from the Old Havana Collection will enhance the décor of any room. Included in this unit is the motor assembly, floor mount, and post (each also sold separately). The motor assembly and floor mount come in a rust finish. The post displays an elegant carved pattern. The motor assembly features a fan in an enclosed, protective case that is mounted between two decoratively scrolled arms. The fan adjusts easily into a variety of positions for any situation.The fan has three forward speeds and comes with an 8 foot power cord.Please see the section on Customize Your Fan for different colors and styles of posts, motors, and bases. For Accessories, See Group 1 Accessories Page.

Buy cheap COLORfph70ac now

Monte Carlo MC79 3-Light Antler Bowl Kit, Antique White Scavo Review

It is a great product. I did my sons room in camo, deer, and turkey and with this light fixture it turned out great.

Click Here to see more reviews about: Monte Carlo MC79 3-Light Antler Bowl Kit, Antique White Scavo

Product Description:
Monte Carlo - MC79 - Antler Bowl Light Kit, Antique White Scavo

Buy cheap Monte Carlo MC79 3-Light Antler Bowl Kit, Antique White Scavo now Get 7% OFF

John Deere Fan Pull Review

Excellent - I purchased 14 of these, 2 per fan in my house...needless to say - my decor is PURE John Deere!!

Click Here to see more reviews about: John Deere Fan Pull

Product Description:
A decorative John Deere tractor fan pull. Great little gift for the John Deere lover in your life.

Buy cheap John Deere Fan Pull now

30" Direct Drive Wholehouse Fan Review

This direct drive whole house fan took the place of a belt drive and the new fan is very, very powerful.When there are those middle temp days when it is nice out, but the air in the house is still and warm, we pop this on and leave the A/C units off.It makes all the difference.In this instance, you have one motor going, and not drawing anything like an A/C compressor, and the whole house is cool.Great deal more efficient.

Click Here to see more reviews about: 30" Direct Drive Wholehouse Fan

Product Description:
Whole House Fan, Direct-drive, 2 Speed, Propeller Dia 30 In, CFM High 5700, CFM Low 4275, HP 1/3, Fan RPM 775/600, Voltage 120, 60 Hz, Single Phase, Amps 5.6/1.5, Height 7 In, Width 34 In, Depth 34 In, Ceiling Mounting Location, Includes 2-speed Pull Chain Switch and White Shutter

Buy cheap 30" Direct Drive Wholehouse Fan now

Fantech Dryer Booster Lint Trap - Fantech Model DBLT4 Review

I just finished a few loads of laundry after installing all new dryer ducting, a lint trap and Fantech booster fan (the system works VERY well). After every load the lint trap needed to be cleaned. OK, it's doing it's job. However, taking off the door involves pinching the spring retention clip, cleaning the screen then reinstalling the spring clips in very small hard to see holes. The spring clip is awkward and the screen is poorly adhered to the metal housing (after 2 loads it's already coming loose). Also, the Fantech Lint Trap housing is very industrial looking (galvanized sheet metal), and doesn't fully recess in a standard wall frame. I'm not sure Fantech could have put less thought into how this lint trap would actually fit into a laundry room and be used. It needs to be cleaned often, which will likely be the least desirable step in the entire laundry process (including folding and putting clothes away). I am actively looking for an alternate lint trap solution. I am convinced that the lint trap is necessary (the dryer vent isn't catching all the lint), but there must be a better solution out there! (no complaints about the Fan - it's quiet and works perfectly).

Click Here to see more reviews about: Fantech Dryer Booster Lint Trap - Fantech Model DBLT4

Product Description:
Dryer Booster Lint Trap - Fantech Model DBLT4

Buy cheap Fantech Dryer Booster Lint Trap - Fantech Model DBLT4 now

R14 FLOOD 25 WATTS E17 INTERMEDIATE BASE LONG LIFE LIGHT BULB 3,500 HOURS INDUSTRIAL GRADE BULB Review

I made a mistake in ordering this bulb since I was looking for an intermediate base energy saving fluorescent for small ceiling fans. I returned order.

Click Here to see more reviews about: R14 FLOOD 25 WATTS E17 INTERMEDIATE BASE LONG LIFE LIGHT BULB 3,500 HOURS INDUSTRIAL GRADE BULB

Product Description:
Long Life R14 Floodlight 25 Watts Intermediate Base 3,500 hours - Not available in retail stores, Bulborama Industrial Grade 3,500 hour lamps are engineered to last up to 10 times longer than standard bulbs, therefore reducing operational and maintenance costs, and saving both time and money. Industrial Grade lamps are built with brass bases to prevent socket corrosion and multi-support filaments to resist shock and vibration in any burning position.

Buy cheap R14 FLOOD 25 WATTS E17 INTERMEDIATE BASE LONG LIFE LIGHT BULB 3,500 HOURS INDUSTRIAL GRADE BULB now

Honeywell R8225A1017 spud mount fan relay SPDT 24 VAC coil Review

Order and shipping was a snap.
Plumping Planet did a great job.
Instructions and installation were completed in less than an hour.

Click Here to see more reviews about: Honeywell R8225A1017 spud mount fan relay SPDT 24 VAC coil

Product Description:
Honeywell model R8225A1017 Spud Mount Fan Relay with 24 volt coil. Tradeline. Spdt.

Buy cheap Honeywell R8225A1017 spud mount fan relay SPDT 24 VAC coil now

Hunter 28550 Dual Use 120watt Light Kit - Swirled Marble w/BN & WH Finials Review

Light kit is fine and works well on Hunter fan.Surprised to find it uses Candelabra bulbs since the description on Amazon stated that it uses stardard bulbs.

Click Here to see more reviews about: Hunter 28550 Dual Use 120watt Light Kit - Swirled Marble w/BN & WH Finials

Product Description:
Includes Finials in Brushed Nickel, White, New Bronze & Antique Brass

Buy cheap Hunter 28550 Dual Use 120watt Light Kit - Swirled Marble w/BN & WH Finials now Get 33% OFF

Soleus Air FE1-07-01 Quiet Exhaust Ventilation Fan Review

My fan came short on all pieces and with no instructions of any type. Going to CSN's website to see the specs proved fruitless because the link on CSN's site did not work. My contact to their email was ignored. Still, I had a good fan right? Wrong. Within two weeks it rattled louder than the 70's era fan it replaced. Well, it still worked right? Now, less than six months later, the fan has crapped out. Don't buy this unless you're looking to be aggravated and waste your money.I made these complaints before and my review was removed, so I'm back. It was that bad.

Click Here to see more reviews about: Soleus Air FE1-07-01 Quiet Exhaust Ventilation Fan

Product Description:
Soleus Air FE1-07-01 Features -Silent Operation -Voltage: 120V, 60Hz -Watts: 36.4 W -Mounting Dimensions: 8.07" W x 9.69" D x 9.69" H -Fan Speed: 851 RPM -Noise dB(A): ¡Ü 40 (0.5 Sones) -Air Flow : 75.6 CFM A powerful line of ventilation fans easily removes concentrated moisture quickly and quietly. Unlike traditional noisy ventilation products, the Soleus Air line of ventilation fans are remarkably quiet while providing powerful moisture removal from steamy mirrors and damp walls to help prevent mold, mildew, and peeling paint. Manual NOTE: Ceiling Fans are not universal. Warranty is void if products from two different manufacturers are combined.

Buy cheap Soleus Air FE1-07-01 Quiet Exhaust Ventilation Fan now

Premium Ceiling Shutter 29x34 - 4HA11 Review

This is a higher quality unit that the vent i replaced.I had to replace my pervious unit after the people who sealed my attic also sealed the vent shut.

The local utility contracts attic and house sealing as part of an energy conservation program, your tax dollars at work.I do not know what it will do for my heating bill but they did seal my attic vent closed.

I had to do a lot of adaptation to get a good mount but this may be becuase the people who installed the last one did such a bad job.I had to make a frame and secure it in place and then attach teh vent to the new frame.I made the frame from 1/8" by 1" lath.

The vent baldes are counterbalanced by a spring.The instruction specify that the spring be tensioned to just let the vent close.This is what ai did and in tests both sides closed relaibly.ON installation one sice stays open.Any touch will close them and if I push the vent open with a stick it always closes.Every time the fan wind opens it, it stays open.I suggest you be sure the closure is very secure.I only need it closed at the end of the season, so this issue a mild annoyanceOtherwise it's an excellent product.

Click Here to see more reviews about: Premium Ceiling Shutter 29x34 - 4HA11

Product Description:
Premium Ceiling Shutter, Gravity Operated, Single Panel, Fits Fan Dia 30 In, Opening Required 29 x 34 1/4 In, Length 30 3/4 In, Width 35 7/8 In

Buy cheap Premium Ceiling Shutter 29x34 - 4HA11 now

Emerson Fans - CF875SPB: Crystal LX Pull Chain Fan For Indoor Review

Very elegant fan, crystal base eludes to a much more expensive fan. Works great, looks great, only problem is, be aware to get the intermediate light bulbs for the light system.Had a hard time finding the 60 watt,
ordered them from Amazon.com at a very reasonable price with speedy delivery. Don't use 40 watt, too dark, 60 watt is perfect. Also my electrician stated small lights in the crystal base is very hard to replace when they burn out.Need to remove all blades and the housing unit to replace the small bulbs, so I won't be using the base lights very much.But over all very nice fan with a great look.

Click Here to see more reviews about: Emerson Fans - CF875SPB: Crystal LX Pull Chain Fan For Indoor

Product Description:
Emerson Crystal LX Pull Chain Fan For Indoor

Buy cheap Emerson Fans - CF875SPB: Crystal LX Pull Chain Fan For Indoor now

Broan-NuTone 78W Fan Control - White Review

Only worked on one speed. Removed it and put in a Broan Fan Control 57W which works a lot better.

Click Here to see more reviews about: Broan-NuTone 78W Fan Control - White

Product Description:
Broan-NuTone 78W Fan Control - White Since their beginning in 1932, Broan has pioneered many of the product innovations now established as standards of the industry. Today, Broan carries on the commitment to provide the finest products in the industry.Broan-NuTone 78W Fan Control - WhiteFeatures:; Ceiling Fans Ceiling Fan Lights and Accessories; 4 Speed Control, 1.5 amps; 4-position "no hum" ceiling fan control; Decorator wall plate; Screws included; 120V AC 1.5 amp.

Buy cheap Broan-NuTone 78W Fan Control - White now Get 32% OFF

Hunter - 25751 : 48 Inch White with 5 White Blades Review

The light can not be turned up enough. It should allow for more wattage and CFL bulbs...The fan looks and works great though

Click Here to see more reviews about: Hunter - 25751 : 48 Inch White with 5 White Blades

Product Description:
Hunter - 25751 : 48" White with 5 White Blades

Buy cheap Hunter - 25751 : 48 Inch White with 5 White Blades now